HC-165/185 MAINTENANCE
X7502255307 29
© 9/2013 ECHO Inc.
Adjustment
Level 2.
Hedge clipper blades are very sharp. Touching them may
lead to severe personal injury. Use long hex wrenches and
sockets with extensions when tightening blade screws and
blade locknuts to keep hands at a safe distance from sharp
blades.
1. Tighten blade screws. (A) securely
2. Hold blade screws (A) to prevent turning, and tighten
locknuts (B).
Locking ability of Hedge Clipper blade lock nuts will diminish
each time they are removed. Replace if turning resistance is not
felt when installing locknuts.
Parts Required: none
To Next Page
Loading...
Need help?
General
