HC-2020 OPERATION
X7702245301 23
© 11/19 ECHO Incorporated
3. Recoil Starter
Place the unit on a flat, clear
area. Grip the support handle
securely with one hand, and pull
the recoil starter handle (D) until
engine starts.
Note: If engine does not start
after 5 pulls, use Cold
Start Procedure.
Stopping Engine
1. Throttle
Release throttle trigger (F) and
allow engine to return to idle
before shutting off engine.
2. Stop Switch
Move stop switch (A) to STOP
position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using unit
again.