Echo HC-2020 - Spark Plug Inspection and Adjustment

HC-2020 MAINTENANCE
X7702245301 29
© 11/19 ECHO Incorporated
Spark Plug
Level 2.
Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) otherwise
severe engine damage may occur.
1. Remove spark plug and check
for fouling, worn and rounded
center electrode.
2. Clean the plug or replace with a
new one. DO NOT sand blast to
clean. Remaining sand will
damage engine.
3. Adjust spark plug gap by
bending outer electrode.
4. Tighten spark plug to 150-170 kgf • cm (130-150 in • lbf).
Parts Required: Tune-Up Kit
0.65 mm (0.026 in.)