HC-2020 MAINTENANCE
X7702245301 35
© 11/19 ECHO Incorporated
4. Allow cleaning mixture to soften the remaining gummy residue then
wipe it from the blade.
5. Apply clean oil to the entire length of the blade. Be certain the blade
bolts are lubricated.
6. Wipe excess oil from the blade before putting the unit back in service.
Gear Box
Level 1.
1. Clean dirt from the grease fitting
(A).
2. Apply 1- 2 pumps of grease into
fitting, DO NOT over fill. Leave
room for the grease to expand
during operation
3. Wipe excess grease from around
grease fitting.
Blades
Hedge trimmer blades are very sharp, touching them may lead
to severe personal injury. Use long hex wrenches and sockets
with extensions when tightening blade screws and blade lock
nuts to keep hands at a safe distance from sharp blades.
Blades should only be removed and reinstalled by an authorized
servicing dealer, otherwise premature wear or internal damage may
occur.
Sharpening
Level 2.
If a power grinder is used DO NOT allow blade to over heat.
Parts Required: Lithium Based Grease.
To Next Page
Loading...
Need help?
General