Echo HC-2210 - Maintenance Intervals

HC-2210 / 2810 MAINTENANCE
X7702248101 27
© 10/21 ECHO Incorporated
Maintenance Intervals
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and
your experience will determine the frequency of required maintenance.
MAINTENANCE PROCEDURE NOTES:
1
Apply lithium based grease every 25 hours of use.
2
Inspect blade, and clean and sharpen as needed. Lubricate blades
periodically during use.
3
Low evaporative fuel tanks DO NOT require regular maintenance to
maintain emission integrity.
* Replacement is recommended based on the finding of damage or wear
during inspection.
COMPONENT/SYSTEM
MAINTENANCE
PROCEDURE
REQUIRED
SKILL LEVEL
Daily or Before Use
Air Filter
Inspect/Clean *
1
Choke Shutter
Fuel System Inspect
3
Cooling System Inspect/Clean 2
Recoil Starter Rope Inspect/Clean *
1
Screws/Nuts/Bolts Inspect/Tighten/Replace *
Blades Inspect/Clean
2
Every Refuel
Fuel System Inspect
3
1
Three Months
Air Filter Replace *
1Fuel Filter
Inspect *
Fuel Cap Gasket
Spark Plug
Inspect/Clean/Replace *
1
Muffler Spark Arrestor
2
Cylinder Exhaust Port Inspect/Clean/De-carbon
Gear Housing
Grease
1
Yearly
Fuel Filter Inspect/Replace *
1
Fuel Cap Gasket Replace *