Echo HCA-2620

X7502342200
© 5/2017 ECHO Inc.
ENGLISH
Operator’s Manual
Specifications, descriptions and illustrative material in this literature are
as accurate as known at the time of publication, but are subject to
change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
x7722271404 / x772000164
HCA-2620
Shaft Hedge Trimmer
Burn Hazard
The muffler or catalytic muffler and surrounding cover
may become extremely hot. Always keep clear of
exhaust and muffler area, otherwise serious personal
injury may occur.
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects,
or other reproductive harm.
Users of this equipment risk injury to themselves and
others if the unit is used improperly and/or safety
precautions are not followed. Echo provides an
operator’s manual and a safety manual. Both must be
read and understood for proper and safe operation. Failure to do
so could result in serious injury.
Note: This product complies with CAN ICES-2/NMB-2.

Echo HCA-2620 Specifications

General

Brand	Echo
Model	HCA-2620
Category	Trimmer
Language	English

Summary

Introduction

Manual Overview

Overview of the operator's manual and its purpose.

Servicing Information

Parts and Serial Number Identification

How to identify and obtain genuine ECHO parts and serial numbers.

Service and Dealer Information

Information on warranty service and authorized dealers.

Safety

Product Support and Manuals

Information on product support, registration, and obtaining manuals.

Safety Alerts and Symbols

Explanation of safety alerts (DANGER, WARNING, CAUTION) and symbols.

Personal Safety Equipment and Condition

Guidelines on physical condition, clothing, eye, hand, and hearing protection.

Operational Safety Precautions

Safe operating practices including grip, stance, work area, and adjustments.

Health and Environmental Hazards

Warnings related to pacemakers, cold exposure, RSI, electrical, and exhaust hazards.

Equipment Safety

Warnings about attachments, moving parts, hot surfaces, and maintenance.

Emission Control

CARB And EPA Emissions Control Information

Explains engine emission control systems and compliance.

Emission Control Label

Information on the location and purpose of the emission control label.

Product Emission Durability

Explanation of emission compliance periods and maintenance.

Product Description

Safety Decals and Components

Locating and understanding safety decals and identifying parts via illustration.

Assembly

Gear Housing Assembly Drive Shaft

Step-by-step instructions for assembling the gear housing and drive shaft.

Operation

General Operation Warnings

Warnings about moving parts and fire hazards during operation.

Fuel Requirements and Handling

Approved fuel types, oil ratios, and safe fuel handling procedures.

Adjusting Cutting Angle

Safety instructions for adjusting the cutting angle of the hedge trimmer.

Starting and Stopping

Starting Cold Engine

Step-by-step procedure for starting the engine when cold.

Starting Warm Engine

Procedure for starting the engine when it is already warm.

Engine Control and Trimming

Stopping Engine

Procedure for safely shutting down the engine.

Hedge Trimming Operations

Instructions for using the shoulder harness and trimming.

Maintenance

General Maintenance Precautions

Warnings and general advice before performing maintenance.

Maintenance Skill Levels

Explanation of skill levels required for different maintenance tasks.

Maintenance Intervals and Procedures

Schedule of maintenance tasks and required procedures by interval.

Air Filter Maintenance

Cleaning and Replacing the Air Filter

Step-by-step guide for cleaning or replacing the air filter.

Fuel Filter Maintenance

Replacing the Fuel Filter

Procedure for removing and installing a new fuel filter.

Spark Plug and Cooling System

Spark Plug Maintenance

Instructions for inspecting, cleaning, and gapping the spark plug.

Cooling System Maintenance

Guidance on maintaining the engine's cooling system.

Exhaust System Maintenance

Spark Arrestor Screen Cleaning

Procedure for cleaning or replacing the spark arrestor screen.

Exhaust Port Cleaning

Instructions for cleaning carbon deposits from the exhaust port.

Carburetor Adjustment

Carburetor Adjustment Procedure

Steps for adjusting the carburetor for optimal performance.

Engine Break-In and High Altitude

Guidance on engine break-in and adjustments for high altitude operation.

Lubrication

Blade Lubrication

Procedure for cleaning and lubricating the hedge trimmer blades.

Gear Case Lubrication

Instructions for lubricating the gear case fitting.

Drive Shaft Assembly Lubrication

Drive Shaft Assembly Lubrication

Procedure for lubricating the drive shaft assembly.

Blade Maintenance

Blade Sharpening

Step-by-step guide for sharpening the hedge trimmer blades.

Blade Adjustment

Procedure for tightening blade lock nuts and screws.

Troubleshooting

Engine Problem Troubleshooting Chart

Guide to diagnose and resolve common engine starting and running issues.

Storage

General Storage and Transport Precautions

Safety warnings and guidelines for storing and transporting the unit.

Long Term Storage (Over 30 Days)

Detailed procedure for preparing the unit for storage longer than 30 days.

Specifications

Product Specifications

Technical details and measurements of the hedge trimmer.

Notes

General Notes

Blank section for user notes.

Product Registration

Online and Mail Registration

Instructions for registering the product online or via mail.