Echo HCR-1500 User Manual

1
INTRODUCTION
We are constantly working on technical
improvement of our products. For this reason,
technical data, equipment and design are subject to
change without notice. All specifications,
illustrations and directions in this SERVICE DATA
are based on the latest products information
available at the time of publication.
For further information to service this model, please
refer to ECHO SERVICE MANUAL Ord. No. 402-
19.
HEDGE TRIMMER
HCR-1500
Reference No. 12-21A-00
ISSUED: 199807
SERVICE DATA
1
12-21A-00
CONTENTS
page
1 SERVICE INFORMATION ............................ 2
1-1 Specifications ............................................ 2
1-2 Technical data .......................................... 3
1-3 Torque limits ............................................... 4
1-4 Special repairing materials ....................... 4
1-5 Service limits ............................................. 5
1-6 Special tools ............................................. 6
2 SERVICE HINT ............................................. 7
2-1 Rotating rear handle construction ............. 7
2-2 Rotating rear handle function .................... 8
HCR-1500
INDEX

Echo HCR-1500 Specifications

General

Brand	Echo
Model	HCR-1500
Category	Trimmer
Language	English

Summary

1 SERVICE INFORMATION

1-1 Specifications

Provides detailed specifications for the hedge trimmer including dimensions, engine, and fuel system.

1-2 Technical data

Details engine, ignition, and carburetor technical parameters, including speeds, pressures, and settings.

1-3 Torque limits

Lists torque specifications for various components like starter, ignition, fuel, clutch, engine, gear, cutter, and handle parts.

1-4 Special repairing materials

Lists recommended materials such as grease and thread locking sealant for specific repair and maintenance tasks.

1-5 Service limits

Defines wear limits for critical engine components like cylinder bore, piston diameter, ring groove, and crankshaft runout.

1-6 Special tools

Lists specialized tools required for servicing the hedge trimmer, with part numbers and their intended uses.

2 SERVICE HINT

2-1 Rotating rear handle construction

Explains the mechanical construction of the rotating rear handle, detailing its components and assembly.

2-2 Rotating rear handle function

Describes how the rotating rear handle mechanism operates, including locking and unlocking sequences.