Echo PB-255LN - ASSEMBLY; Install Blower Pipes

PB-255LN ASSEMBLY
X7501186403 17
© 07/22 ECHO Incorporated
ASSEMBLY
Never perform maintenance or assembly procedures with
engine running or serious personal injury may result.
Install Blower Pipes
1. Stand unit upright on blower
base.
2. Release locking ring (C) with a
coin (B) or screwdriver, and
rotate so that lock symbol is at
top of ring.
3. Align locking ribs (E) on main
blower pipe with recesses (D) in
locking ring, and slide main
blower pipe into locking ring.
coin
C
B
E
D