EasyManua.ls Logo

Echo PB-260

Echo PB-260
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Power Blower
Operator's Manual
MODEL PB-260
WARNING DANGER
Read rules for safe operation and all instructions carefully. ECHO provides this Operator's
Manual which must be read and understood for proper and safe operation.
X753001110
06/03
X7531132700

Questions and Answers:

Echo PB-260 Specifications

General IconGeneral
BrandEcho
ModelPB-260
CategoryBlower
LanguageEnglish

Summary

INTRODUCTION

THE OPERATORS MANUAL

Read and understand this manual before operation. Keep it in a safe place for future reference.

SAFETY

MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION

Explanation of safety alerts, symbols, and key words used in the manual.

INTERNATIONAL SYMBOLS

Explanation of various symbols used on the unit and in the manual.

PERSONAL CONDITION AND SAFETY EQUIPMENT

Advice on operator physical condition and required safety equipment.

SAFETY

Eye Protection

Requirement to wear eye protection meeting ANSI Z87.1 or CE standards.

Proper Clothing

Guidance on appropriate snug-fitting, durable clothing and footwear.

SAFETY

Repetitive Stress Injuries

Guidance to reduce the risk of Repetitive Stress Injury (RSI) and Carpal Tunnel Syndrome (CTS).

Clear the Work Area

Instructions for ensuring a safe work environment, including spectator control.

EQUIPMENT CHECK

Approved Attachments and Unit Integrity

Ensuring unit integrity and using only approved attachments.

EMISSION CONTROL

EPA Phase 2 Compliance

Information regarding the engine's emission control system and compliance.

DESCRIPTION

Safety Decals

Locating and understanding safety decals on the unit.

Unit Components Identification

Identification of numbered components on the blower unit.

DESCRIPTION

THROTTLE POSITION LEVERSTOP SWITCH

Controls speed and stops the engine.

RECOIL STARTER HANDLE ROPE

Used to start the engine via a pull-rope mechanism.

SPARK PLUG

Provides spark to ignite the fuel mixture.

ASSEMBLY

INSTALL BLOWER PIPES

Step-by-step instructions for attaching the blower pipes.

Install Stick Handle

Instructions for attaching and positioning the stick handle.

OPERATION

FUEL REQUIREMENTS

Specifications for gasoline and two-stroke oil, and mixing instructions.

HANDLING FUEL

Safety precautions for mixing, storing, and handling fuel.

STARTING COLD ENGINE

Throttle Lever Adjustment

Setting the throttle lever to the idle detent position.

Choke Operation

Using the choke for cold starting procedures.

Primer Bulb Use

Priming the carburetor with the primer bulb before starting.

STARTING WARM ENGINE

Procedure Overview

Starting a warm engine, differing from cold start by not closing the choke.

STOPPING ENGINE

Throttle Lever Operation

Steps to properly stop the engine using the throttle lever and stop switch.

OPERATING BLOWER

Safe Operation and Best Practices

Covers safety, speed selection, noise, and dust control during operation.

MAINTENANCE

Scheduled Maintenance and Skill Levels

Overview of maintenance importance and task difficulty ratings.

MAINTENANCE INTERVALS

Recommended Dealer Maintenance

Maintenance procedures recommended for authorized ECHO dealers.

Do-It-Yourself Maintenance

Maintenance tasks that can be performed by the user.

AIR FILTER

Cleaning and Replacement

Procedure for cleaning or replacing the air filter element.

FUEL FILTER

Inspection and Replacement

Procedure for inspecting and replacing the fuel filter.

SPARK PLUG

Inspection, Cleaning, and Gap Adjustment

Steps for checking, cleaning, or replacing the spark plug and setting its gap.

COOLING SYSTEM

Cleaning Grill and Cylinder Fins

Instructions for cleaning air intakes and cylinder fins for proper cooling.

Cleaning Cylinder Fins

Detailed Cleaning Steps

Detailed steps for cleaning engine cylinder fins to ensure proper cooling.

EXHAUST SYSTEM

Spark Arrestor Screen Maintenance

Procedure for checking and cleaning or replacing the spark arrestor screen.

Cylinder Exhaust Port

Inspection and Cleaning

Importance and procedure for inspecting and cleaning the cylinder exhaust port.

CARBURETOR ADJUSTMENT

Idle Speed Adjustment

Procedure for checking and adjusting the engine's idle speed.

TROUBLESHOOTING

Troubleshooting Chart

Table detailing common problems, their causes, and recommended remedies.

STORAGE

Long Term Storage (Over 30 Days)

Procedure for preparing the unit for storage exceeding 30 days.

SPECIFICATIONS

Model and Performance Data

Detailed technical specifications for the PB-260 power blower.

SERVICING INFORMATION

Parts and Authorized Service

Information on obtaining genuine parts and authorized service dealers.

Consumer Support and Manuals

Contact information for consumer support and obtaining manuals.

Related product manuals