Echo PB-265LN User Manual (English)

Other manuals for Echo PB-265LN

Questions and Answers:

A
autumnmcclainJul 26, 2025
Why is my Echo Blower engine hard to start?
- A
  Anthony SmithJul 26, 2025
  If your Echo Blower engine is hard to start or doesn't start, several factors could be at play. It might be due to a lack of fuel at the carburetor, in which case you should clean or replace the affected parts. Another possibility is a fuel mixture that's too rich; try opening the choke, cleaning or replacing the air filter, or adjusting the carburetor. Also, ensure the ignition is not in the STOP position and verify the spark plug gap is correctly adjusted to 0.65 mm (0.026 in.). Clean or replace the spark plug if it's covered with carbon, fouled with fuel, or defective.
B
Benjamin CastroAug 2, 2025
Why is my Echo PB-265LN Blower engine cranking but not starting?
- D
  debrabrownAug 2, 2025
  If your Echo Blower's engine cranks but is hard to start or doesn't start at all, several factors could be at play. The fuel strainer or fuel line might be clogged, or there could be an issue with the carburetor. Try cleaning or replacing these components. If the fuel mixture is too rich, open the choke, clean or replace the air filter, and adjust the carburetor. Also, ensure the spark plug gap is correctly set to .65mm (0.026 in.), and clean or replace the spark plug if it's covered with carbon or fouled with fuel. If there's no spark, ensure the switch is set to the ON position. For carburetor issues or persistent spark problems, consult your Echo dealer.
D
Darlene GrayAug 8, 2025
What to do if Echo PB-265LN Blower engine runs, but dies?
- H
  Herbert HooverAug 8, 2025
  If your Echo Blower engine runs but dies or doesn't accelerate properly, check the following: the air filter may be dirty (clean or replace it), the fuel filter may be dirty (replace the filter or fuel), or the fuel vent may be plugged (clean or replace it). Also, the plug may be dirty or worn (clean and adjust or replace it), there may be improper adjustment (adjust it), the cooling system may be dirty or plugged (clean it), or the spark arrester screen may be plugged (replace it).
H
Heidi LewisAug 13, 2025
What to do if my Echo Blower engine runs, but dies or does not accelerate properly?
- T
  Tyler HernandezAug 13, 2025
  If your Echo Blower engine runs but dies or doesn't accelerate properly, it could be due to a dirty air filter. Try cleaning or replacing it. The fuel filter might also be dirty, in which case you should replace it. A plugged fuel vent can also cause this issue, so clean or replace it. Additionally, check the spark plug; if it's dirty or worn, clean and adjust it, or replace it altogether. Improper carburetor adjustment or a dirty/plugged cooling system can also be culprits, so adjust the carburetor and clean the cooling system accordingly. Finally, a plugged spark arrestor screen should be replaced to resolve the issue.
L
Lisa StephensonAug 19, 2025
How to fix an Echo PB-265LN Blower that runs, but the blower doesn't work or is weak?
- D
  Debra MitchellAug 19, 2025
  If your Echo Blower runs, but the blower doesn't work properly, it might be due to a build-up of debris, which you should unclog. Vibration can also cause this issue, so tighten any loose parts. If the blower is worn or has been misused, consider replacing it.