PB-265LN OPERATION
X7531181900 25
© 10/23 ECHO Incorporated
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the
choke.
1. Throttle Position Lever
Move throttle lever (A) to
START/IDLE ( ) position.
2. Purge Bulb
Pump purge bulb (C) until
fuel is visible and flows freely
in the clear fuel tank return
line.
3. Recoil Starter
Pull recoil starter handle (D)
and engine should start.
Note: If engine does not start
after 5 pulls, use Cold
Start Procedure.
To Next Page
Loading...
