PB-265LN OPERATION
X7531181900 19
© 10/23 ECHO Incorporated
8. Assemble straight pipe (J) onto
swivel pipe (C), until you feel light
resistance. Hold swivel pipe and
turn straight pipe clockwise,
engaging positive locking
channels, until connection is firm.
Do not force connection.
9. Assemble straight pipe with
decal (K) to straight pipe (J) as in
step 8.
Note: Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If
loosening occurs, remove two straight pipes and install
according to instructions 8 & 9.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit. Blower housing
might contain shredder blades and other sharp edges that can
cause serious injuries if touched, even if engine is off and
blades are not moving. Wear gloves to protect hands from sharp
edges and hot surfaces.
Operation of this equipment might create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrester to prevent discharge of hot particles from the engine.
Contact local fire authorities for laws or regulations regarding
fire prevention requirements.
To Next Page
Loading...
Need help?
General