EasyManuals Logo

Echo PB-265LN User Manual

Echo PB-265LN
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
MAINTENANCE PB-265LN
32 X7531181900
© 10/23 ECHO Incorporated
Spark Plug
Level 2.
Use only NGK BPM8Y spark plug (BPMR8Y in Canada) otherwise
severe engine damage may occur.
1. Remove spark plug and check
for fouling, worn and rounded
center electrode.
2. Clean the plug or replace with a
new one. DO NOT sand blast to
clean. Remaining sand will
damage engine.
3. Adjust spark plug gap by
bending outer electrode.
4. Tighten spark plug to 150-170 kgf • cm (130-150 Ibf • in).
Cooling System
Level 2.
To maintain proper engine operating temperatures, cooling air must
pass freely through the cylinder fin area. This flow of air carries
combustion heat away from the engine.
Overheating and engine seizure
can occur when:
Air intakes are blocked,
preventing cooling air from
reaching the cylinder.
Dust and grass build up on the
outside of the cylinder. This
build up insulates the engine
and prevents the heat from
leaving.
Parts Required: Tune-Up Kit
0.65 mm (0.026 in.)

Other manuals for Echo PB-265LN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo PB-265LN and is the answer not in the manual?

Echo PB-265LN Specifications

General IconGeneral
BrandEcho
ModelPB-265LN
CategoryBlower
LanguageEnglish

Related product manuals