Echo PB-260 User Manual

13
POWER BLOWER
OPERATOR'S MANUAL
STARTING
WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke.
1. Throttle Lever
Move throttle lever (A) to idle detent position.
2. Primer
Pump primer bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
3. Recoil Starter
Gently pull recoil starter handle/rope (D) until engine fires.
NOTE
If engine does not start after 5 engine engagements, use cold start
procedures.
STOPPING ENGINE
1. Throttle Lever
Move throttle lever (A) to idle detent position and allow engine to
retun to idle before shutting off engine.
2. Throttle Lever
Move throttle lever (A) to "O" STOP position.
WARNING DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using blower
again.
A
A
C
D

Echo PB-260 Specifications

General

Brand	Echo
Model	PB-260
Category	Blower
Language	English