Need help?Do you have a question about the Echo PB-403T and is the answer not in the manual?
Explains the purpose and content of the operator's manual for future reference.
Explains safety alert symbols, key words (WARNING, DANGER, IMPORTANT, NOTE) and their meanings.
Lists and explains various international symbols used on the unit and in the manual.
Emphasizes the importance of the operator's physical condition and required safety equipment.
Details physical and mental conditions that can impair safe operation of the unit.
Details requirements for eye, hand, breathing, and hearing protection.
Details recommended clothing and advice for hot/humid weather.
Discusses Raynaud's Phenomenon and precautions against vibration and cold exposure.
Explains Repetitive Stress Injury (RSI) risks and prevention methods.
Instructions on clearing the work area, warning bystanders, and considering wind.
Advises on holding the unit firmly and maintaining a solid stance.
Warns about hot surfaces and keeping the exhaust area clear of flammable debris.
Stresses using only ECHO approved attachments and performing unit checks.
Provides information on the engine's emission control system and compliance period.
Locates and describes important safety decals on the PB-403H model.
Identifies the location and purpose of general warning and sound labels.
Locates and describes important safety decals on the PB-403T model.
Identifies the location and purpose of general warning and sound labels.
Step-by-step instructions for assembling blower pipes and stick handle for PB-403H.
Step-by-step instructions for assembling blower pipes for PB-403T.
Details the correct type of gasoline and two-stroke oil mixture for the engine.
Provides crucial safety warnings and procedures for handling flammable fuel.
Step-by-step guide for mixing gasoline and two-stroke oil correctly.
Detailed procedure for starting the engine from a cold state for both models.
Procedure for starting the engine when it is already warm.
Instructions on how to properly stop the engine for both models.
How to operate the blower, including speed control and usage tips.
Defines skill levels (1, 2, 3) for performing maintenance tasks.
Provides a schedule for recommended maintenance procedures based on usage.
Instructions for cleaning and replacing the air filter element.
Instructions for inspecting and replacing the fuel filter.
Procedures for inspecting, cleaning, and replacing the spark plug.
How to clean cooling fins and air intakes to prevent overheating.
How to inspect and clean the spark arrestor screen in the muffler.
Importance of cleaning the cylinder exhaust port for emissions durability.
Requirement to operate engine for two fuel tanks before adjusting carburetor.
States that high altitude adjustment is not required for this engine.
Identifies and describes the function of idle, low speed, and high speed adjustment screws.
Lists checks to perform before adjusting the carburetor.
Initial steps for adjusting the carburetor screws.
Final steps for adjusting carburetor for smooth engine operation.
Lists common causes and remedies for engine starting issues.
Lists common causes and remedies for engine dying or poor acceleration.
Lists causes and remedies for the engine failing to crank.
Lists causes and remedies for weak or uneven blower performance.
Detailed procedure for preparing the unit for storage longer than 30 days.
Lists detailed technical specifications for both PB-403H and PB-403T models.
Information on how to obtain genuine ECHO parts and required model numbers.
Guidance on warranty service and finding authorized dealers.
Contact information for consumer product support and assistance.
Information on obtaining manuals and registering the equipment for warranty.
To Next Page
General