D
dennissarahAug 6, 2025
Why is my Echo Pole Saw engine hard to start?
- MMichael MooreAug 6, 2025
If your Echo Pole Saw engine starts hard or doesn't start at all, possible causes include a fuel strainer or fuel line obstruction (clean or replace), a carburetor issue (consult your Echo dealer), a fuel mixture that's too rich (open choke, clean or replace the air filter, adjust carburetor), a stop switch that's OFF or an electrical problem (turn the switch ON), or an incorrect, carbon-covered, fuel-fouled, or defective spark plug (adjust to 0.65mm or 0.026 in, clean or replace the plug).