PPT-2620 MAINTENANCE
X7507820600 35
© 2/2017 ECHO Inc.
ENGLISH
Assure throttle wire retaining
clip (A) remains in place as
shown when removing or
installing air filter cover.
3. Remove foam pre-filter (B)
and air filter and clean as
indicated below:
4. Foam Pre-filter
• Clean foam filter in water/
detergent solution and
rinse with clean water.
• Wrap the filter in a clean,
dry cloth and squeeze (do
not wring) dry. Allow to dry
completely before reuse.
Do not oil.
Air Filter
• Lightly brush debris from filter. Replace filter if it is damaged, fuel
soaked, very dirty, or the rubber sealing edges are deformed.
5. Assemble components in reverse order.
Assure air filter is assembled
with pleats oriented vertically.
Fuel Filter
Level 1.
Parts Required: Tune Up Kit.
To Next Page
Loading...
Need help?
General