2
1
2
1
Spray Gun
• To lock the trigger of the spray gun aim the gun away from you and push the lock button from right to left,
(Fig. 7), after doing so, squeeze or pull the trigger to make sure it is locked and will not move. Always leave
lock button in lock position when not in use. This ensures the gun is in “safe” mode until it is ready for use.
Lance
• While the spray gun is in the locked position, insert the high/low nozzle lance or turbo nozzle into the end
of the spray gun by inserting and pushing together turning clockwise simultaneously. To remove push
together and turn counter clockwise (Fig. 8).
Remember to always push the safety lock button to lock the trigger when changing lances, to ensure that
they do not accidentally eject with force during removal.
• When using the turbo lance, make sure the turbo nozzle is screwed on tight at the end of the lance, each
time you use it. The Turbo lance is designed for high impact cleaning. Only use on hard surfaces such as
driveways, cement surfaces, patio bricks, etc.
Always test a small area to avoid chance of damaging the surface. (Fig. 9).
• Using High/Low Nozzle. High Pressure spray is used for cleaning and Low Pressure spray activates the
detergent function.
Fig. 7
Fig. 8
Fig. 9
Trigger
Trigger
Push to
lock
Push to
unlock
10
To Next Page
Loading...
