Echo SHC-260

SHAFT HEDGE CLIPPER
OPERATOR'S MANUAL
11
SPECIFICATIONS
MODEL -----------------------------------------------------SHC-260
Length------------------------------------------------------- 2230 mm (87.8 in.)
Width--------------------------------------------------------250 mm (9.84 in.)
Height ------------------------------------------------------- 250 mm (9.84 in.)
Weight (dry) ------------------------------------------------6.08 kg (13.4 lb.)
Engine Type ------------------------------------------------Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 34.0 mm (1.34 in.)
Stroke--------------------------------------------------------28.0 mm (1.10 in.)
Displacement -----------------------------------------------25.4 cc (1.55 cu. in.)
Exhaust ------------------------------------------------------Spark Arrestor Muffler w/catalyst
Carburetor -------------------------------------------------- Walbro diaphragm model w/primer pump
Ignition System --------------------------------------------Flywheel magneto, capacitor discharge
Spark Plug --------------------------------------------------NGK BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ----------------------------------------------------------Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------Echo Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.58 lit. (19.6 US fl. oz.)
Recoil Starter System -------------------------------------- Automatic Recoil Starter
Clutch -------------------------------------------------------Centrifugal Type
Gear Case Ratio --------------------------------------------5.88:1
Cutter -------------------------------------------------------- Double Reciprocating Blade, Double Edge
Effective Length -----------------------------------------455 mm (17.9 in.)
Pitch ------------------------------------------------------ 35 mm (1.4 in.)
Idle Speed---------------------------------------------------2,400 - 3,200 RPM
Wide Open Throttle Speed (W.O.T.) -------------------- 10,000 - 12,000 RPM