EasyManua.ls Logo

Echo SRM-230

Echo SRM-230
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time
of publication, but are subject to change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
Operators Manual
X7532098207
© 2/2014 ECHO Inc.
x7722271404 / x772000164
SRM-230
GRASS TRIMMER /
BRUSH CUTTER
Burn Hazard
The muffler or catalytic muffler and surrounding cover may become extremely hot.
Always keep clear of exhaust and muffler area, otherwise serious personal injury may
occur.
The engine exhaust from this product contains chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
Users of this equipment risk injury to themselves and others if the unit is used
improperly and/or safety precautions are not followed. ECHO provides an operator’s
manual and a safety manual. Both must be read and understood for proper and safe
operation. Failure to do so could result in serious injury.

Other manuals for Echo SRM-230

Questions and Answers:

Echo SRM-230 Specifications

General IconGeneral
Engine Displacement21.2 cc
Shaft TypeStraight
Engine Type2-stroke
CarburetorDiaphragm
Starter Systemi-30™
Fuel Capacity14.9 fl. oz.
Fuel Tank Capacity14.9 fl. oz.
Dry Weight12.1 lbs (5.5 kg)

Summary

INTRODUCTION

Operators Manual

Contains specifications and information for safety, operation, maintenance, storage, and assembly specific to this product.

Safety Manual

Explains possible hazards and the measures you should take to insure safe operation.

SERVICING INFORMATION

Parts and Service

Information on obtaining genuine parts and authorized service for your ECHO product.

Warranty and Support

Details on warranty registration, consumer support, and dealer information.

SAFETY

Safety Manual Symbols

Explains safety alert symbols, keywords, and their meanings for safe operation.

Replacement Manuals

Information on obtaining additional or replacement manuals and parts catalogs.

International Symbols

Provides descriptions for various symbols used throughout the manual for operation and safety.

Personal Safety Equipment

Details required safety gear like eye, hand, and hearing protection, and proper clothing.

Vibration and Cold Effects

Discusses Raynaud's Phenomenon and precautions against vibration and cold exposure.

Repetitive Stress Injury Risks

Explains risks of RSI/CTS and methods to reduce them, including breaks and exercises.

Work Area and Operation Safety

Covers clearing the work area, maintaining grip, stance, and avoiding hot surfaces.

Equipment Safety

Ensures use of approved attachments and checks for unit integrity before operation.

EMISSION CONTROL (EXHAUST & EVAPORATIVE)

EPA and CARB Regulations

Explains engine modification and emission control systems based on EPA and CARB regulations.

Emission Control Label and Durability

Details the label on the engine and its emission compliance period.

DESCRIPTION

ASSEMBLY

Plastic Shield Installation

Instructions for installing the plastic debris shield for nylon line operation.

Nylon Line Head Installation

Steps to install the nylon line head onto the trimmer shaft.

Trimmer Line and Handle Assembly

Procedures for advancing trimmer line, removing the line head, and installing the support handle.

OPERATION

Operation With Blades

Details the required configuration for using brush cutter blades and safety precautions.

Blade Selection Guide

Guides on choosing the correct blade type based on material and cutting needs.

Fueling and Fuel Handling

Information on approved gasoline, two-stroke oil, mixing, and fuel handling precautions.

Engine Starting Procedures

Instructions for mixing fuel and starting the engine when cold.

Starting Warm Engine

Procedure for starting the engine when it is already warm, including throttle and choke use.

Stopping the Engine

Instructions on how to safely shut down the engine and troubleshooting if it fails to stop.

MAINTENANCE

Skill Levels and Intervals

Defines skill levels for tasks and outlines maintenance intervals for components.

Air and Fuel Filter Maintenance

Instructions for inspecting, cleaning, or replacing the air filter and fuel filter.

Spark Plug and Cooling System

Guidance on spark plug maintenance and keeping cooling fins clean.

Exhaust System Maintenance

Procedures for cleaning the spark arrestor screen within the exhaust system.

Exhaust Port and Carburetor

Steps to clean exhaust ports and information on carburetor adjustment.

Lubrication and Drive Shaft

Instructions for lubricating the gear housing and drive shaft (flex cable models).

Nylon Line Head Maintenance

Procedures for disassembling the line head and replacing the nylon trimmer line.

Sharpening Metal Blades

Instructions on how to properly sharpen metal blades for balance and safety.

TROUBLESHOOTING

STORAGE

Long Term Storage

Procedures for preparing the unit for storage for 30 days or longer.

SPECIFICATIONS

WARRANTY STATEMENTS

Product Warranty Period

Outlines warranty periods for residential, commercial, and rental use.

Residential Warranty

Details the 5-year warranty for residential use and specific exceptions.

Commercial Warranty

Details the 1-year and 2-year warranties for commercial, industrial, and income-producing use.

Rental Warranty

Specifies the 90-day warranty for units intended for rental purposes.

NOTES

Related product manuals