To Next PageTo Next Page
Need help?Do you have a question about the Echo SRM-2655 and is the answer not in the manual?
General| Engine Type | 2-Stroke |
|---|---|
| Displacement | 25.4 cc |
| Shaft Type | Straight |
| Cutting Width/Swath | 17 inches |
| Line Diameter | 0.095 inches |
| Warranty | 5 years |
Important information regarding the scope of the manual for specific models.
Stresses the necessity of operator training before using the equipment.
Advises on using hearing protection to prevent noise-induced hearing impairment.
Suggests optional protective measures like masks for allergy sufferers.
States requirements for the operator's mental and physical health for safe operation.
Describes the technique for carefully feeding the trimmer into the material to be cut.
Explains the cutting action for large grassy areas using a sweeping motion.
Details the technique for trimming grass along edges and borders.
Explains specific cutting methods like scalping top growth and edging.
Provides specific warnings about operating near broken fencing wire.
Stresses the importance of using the correct blade designed for the specific model.
Describes the force that pushes the unit towards the operator during cutting.
Describes the force that pulls the unit away from the operator during cutting.
Explains kickback as a violent reaction that pushes the unit away, posing a danger.
Identifies the operator's manual and key controls for operating the unit.
Lists and describes components related to the engine and fuel system.
Identifies cutting attachments, harness, and related safety parts.
Describes the loop handle assembly and its attachment to the drive shaft.
Details the process of fitting and securing the bracket to the angle transmission.
Provides instructions on how to remove and install different types of shields.
Identifies and describes the parts for assembling the U-handle.
Explains how to secure the throttle wire to prevent loosening.
Lists and labels the components involved in blade installation.
Offers advice on fuel storage duration to prevent aging and degradation.
Details the procedure for starting the engine when it is cold.
Identifies and explains the function of starting controls like choke and purge bulb.
Provides guidance on what to do if the engine does not start after initial attempts.
Provides instructions for cleaning the air filter to ensure proper engine function.
Guides on how to replace the fuel filter for optimal fuel system performance.
Outlines checks for fuel system integrity to prevent leaks and fire hazards.
Provides instructions for checking and lubricating the angle transmission.
Details specific maintenance steps required before storing the unit for over 60 days.
