GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
7
EMISSION CONTROL
The emission control system for these engines is EM (Engine Modifica-
tion).
An Emission Control Label is located on the engine. (This is an
EXAMPLE ONLY, information on label varies by engine FAMILY).
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: SEH034UB24RA
DISPLACEMENT: 34.0 CC
THIS ENGINE MEETS U.S. EPA PH1 EMISSION
REGULATIONS FOR SMALL NON ROAD ENGINES.
REFER TO OWNER'S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS.
DESCRIPTION
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,
shield installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
CONTENTS
1 - Power Head
1 - Drive Shaft Assembly
1 - Plastic Bag (co-pack)
- 1, Operator's Manual
- 1, Safety Manual
- 1, Warranty Registration Card
- 1, Limited Warranty Statement
- 1, Plastic shield
- 1, Tool Bag
--1, 8mm x 10mm wrench
--1, scrench
--1, locking tool
--1, L-Hex Wrench
- 1, Nylon Trimmer Head
- 1, Safety Glasses
- 1, 2-Stroke Oil Sample, 2.6 oz.
- 1, Shoulder Harness
- 1, Front Handle (L.H.) Assembly
- 1, Plastic Bag
--1, shield plate
--3, 5mm x 18mm screws (shield mtg.)
--1, metal shield
--1, bracket
- 1, Plastic Bag
-- 3, 5mm x 15mm screws (shield mount)
-- 2, 5mm x 8mm screws (bracket to shield)
-- 4, 5mm nuts
-- 4, 5mm lockwashers
To Next Page
Loading...
Need help?
General
