EchoMaster Pro FCTP-GM2003 - Door Panel Disassembly - Part 1; Removing the Inner Handle Trim Panel; Locating and Removing Door Bolts

5
Installation Guide
5
tel - 1-866-766-2267
email - gmsupport@echomaster.com
Illustrations are typical and may not match exact vehicle detail
Step 1
Using a small flat blade pry tool remove the inner handle trim
panel to access the 7mm bolt behind it.
Door Disassembly
Step 2
Remove the 7mm bolt located behind the inner handle trim
panel
.
FCTP-GM2003
Trailering Camera System
Step 3
Locate the remove the 2 x 7mm bolts at the bottom edge of
the door panel
.
IndentationIndentation