EasyManua.ls Logo

EchoMaster Pro FCTP-GM2003 - Camera Cable Routing - Part 1; Mirror Cap Removal and Screw Extraction; Disconnecting Temperature Sensor Connector

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Installation Guide
8
tel - 1-866-766-2267
email - gmsupport@echomaster.com
Illustrations are typical and may not match exact vehicle detail
Step 1
Locate and remove the T15 screw from the bottom of the
mirror cap.
Routing the Camera Cables
Step 3
Disconnect temperature sensor connector (passenger side
only) and set the mirror cap aside.
Step 2
Using a small flat blade pry tool remove the bottom cap
of the mirror. There are indentations in the cap from the
factory to aide in this procedure.
FCTP-GM2003
Trailering Camera System

Related product manuals