X. Maintenance and Servicing
• Before carrying out any checks or maintenance operations, disconnect the plug from the electric
power supply.
• Check your 2-in-1 Trimmer and Lopper regularly before starting the work.
• Damaged cutting blades have to be repaired or exchanged by a qualified service man before
working with the 2-in-1 Trimmer and Lopper.
• After each cutting operation, clean the cutting blade with a soft brush and cloth with lubricating
fluid oil and spray a thin layer of fluid protective oil
• Always keep the ventilation slots in motor housing clean
• Never clean or spray the 2-in-1 Trimmer and Lopper with water. Clean the motor housing only
with a moist cloth and never use detergents or solvents. These could ruin the plastic parts of the 2-
in-1 Trimmer and Lopper. Finally, dry the motor housing carefully.
• Store the 2-in-1 Trimmer and Lopper with the supplied protection blade covers.
XI .Guarantee:
This product is guaranteed against faulty workmanship for a period of 24 months from date of
purchase.
Your guarantee will be invalidated if the machine is modified in any way, used for purposes
outside the parameters of this instruction manual or wilfully damaged or abused.
Your statutory rights remain unaffected.
To Next Page
