Eckman Elite EKETC01E - Technical Data

3
I. Technical Data
Factory Model/Eckman Model
M1E-8ET-410 M1L-4ET-250/EKETC01E
Voltage/Frequency
230V-240V～/50Hz
Input Power
450W/600W
No load speed (Hedge trimmer
/Branch Lopper) RPM
1600/min ./6500/min
Noise emission value LWA
(Hedge trimmer /Branch Lopper)
measured 95dB(A) /102 dB(A)
Hand / arm vibration a vhw
(Hedge trimmer /Branch Lopper)
< 2.52 m /s2 /< 2.27 m /s2
Overall Length (Hedge trimmer
/Branch Lopper)
2.85m /3.25m
Length of cutter blade (Hedge
trimmer /Branch Lopper)
460mm/250mm
Set Net Weight(without power
cord)
6.45Kgs
Branch Lopper Chain and Bar
10 inch Oregon Chain（gauge:0.05” ,pitch:3/8”, 40
links） and Oregon Bar with SDS bar cover
Maximum Diameter Cut of The
reciprocating Hedge Trimmer
blade
15mm/1/2”
Weight of hedge trimmer with
handle / weight of branch lopper
with handle
3.95KGS/3.75KGS
Minimum reach of hedge
trimmer / minimum reach of
lopper
2.35m/2.75m
Blade Adjustment Degrees
(Hedge trimmer /Branch Lopper)
+60° to -80°/0° to 30°
Length of Power Cable
10m cord with BS plug