EC DECLARATION OF CONFORMITY
The undersigned, as authorised by:Ningbo East Tools Co.,Ltd.
Declares that the following equipment manufactured by Ningbo East Tools Co.,Ltd.
has been tested and conforms to the Directive: -
2000/14/EC
2006/41/EC
2004/108/EC
of the European Parliament and of the council on the approximation of the laws of the Member States
relating to the noise emission in the environment by equipment for use outdoors.
Equipment Category - (As defined in the Directive)
Product Name: ELECTRIC TELESCOPIC HEDGE TRIMMER AND BRANCH LOPPER SET
Model: M1E-8ET-410 M1L-4ET-250（ECKMAN MODEL NO.:EKETC01E）
Description: 2 in 1,230-240V, 50HZ
The technical documentation is kept by:Ningbo East Tools Co.,Ltd.
Add: No.307,East Buzheng Rd,Wangchun Industrial Zone,Yinzhou section, Ningbo, China
The conformity assessment procedure followed was in according with annex(2000/14/EC 2006/41/EC
2004/108/EC ) of the Directive.
A copy of this certificate has been submitted to the European Commission and to EU Member State:
the United Kingdom
Place of Declaration: NINGBO, 315000, P.R. China
Date: May, 30, 2017
Signed by:
Position in Company: GENERAL MANAGER
Name and address of manufacturer or Authorised representative: Ningbo East Tools Co.,Ltd.
Add: No.307,East Buzheng Rd,Wangchun Industrial Zone,Yinzhou section, Ningbo, China
IMPORTED BY ECKMAN CO.,LTD
ADD: 29 WELBECK STREET,LONDON W1G 8DA, ENGLAND
To Next Page
