Eckstein komponente KS0530 - User Manual

1
Contents
*About keyestudio ........................................................................................................... 2
*References and After-sales Service .......................................................................... 3
*Warning ............................................................................................................................. 3
*Copyright .......................................................................................................................... 4
1.Description： ................................................................................................................. 5
2.Features： ....................................................................................................................... 6
3.Parameters： .................................................................................................................. 7
4.Kit List： ........................................................................................................................... 7
5.Get Started with Arduino ........................................................................................ 13
(1) Install Arduino IDE ......................................................................................... 13
(2)Keyestudio UNO Development Board ...................................................... 16
(2) Install Driver ..................................................................................................... 22
(4)Arduino IDE Setting ........................................................................................ 28
(5)Start the First Program .................................................................................. 33
6.Installation of the Solar Tracking Device ........................................................... 37
7.Projects ......................................................................................................................... 84
Project 1: LED Blinks ............................................................................................ 84
Project 2: Adjust LED Brightness ..................................................................... 90
Project 3：Push Button Module ...................................................................... 98
Project 4: Passive Buzzer .................................................................................. 104

Summary

1. Product Overview and Specifications

1. Description

Overview of the solar tracking kit based on Arduino, its purpose, and components.

2. Features

Highlights the key functionalities and advantages of the kit, including ease of use and extensibility.

3. Technical Parameters

Lists technical specifications such as working voltage, input voltage, and power dissipation.

4. Kit Contents

Detailed enumeration of all components included in the kit for user verification.

5. Arduino Setup and First Program

Install Arduino IDE

Instructions for downloading and installing the Arduino Integrated Development Environment.

Keyestudio UNO Board Introduction

Introduction to the core development board, its features, and specifications.

Arduino IDE Configuration and First Sketch

Guides on configuring the IDE and running the initial 'Hello World' program.

6. Solar Tracking Device Assembly Guide

Installation Part 1

Assembly steps for Part 1: mounting LCD and battery holder.

Installation Part 2

Assembly steps for Part 2: mounting the control board.

Installation Part 3

Assembly steps for Part 3: integrating power and charging modules.

Installation Part 4

Assembly steps for Part 4: placing sensors and components.

Start Wiring Connections

Detailed instructions for connecting all electronic components and modules.

7. Project Tutorials and Examples

Project 1: LED Blinks

Fundamental program to make an LED blink with basic code and connections.

Project 2: Adjust LED Brightness

Controlling LED brightness using PWM to simulate a breathing effect.

Project 3: Push Button Module

Using a push button to control the state of an LED.

Project 4: Passive Buzzer

Making sounds with a passive buzzer, including playing notes and songs.

Project 5: 1602 LCD Display Module

Interfacing with a 1602 LCD display module to show text and data.

Project 6: Ambient Light Sensor

Reading light intensity using a photoresistor and controlling an LED.

Project 7: DHT11 Temperature and Humidity Sensor

Measuring ambient temperature and humidity using the DHT11 sensor.

Project 8: BH1750 Digital Light Intensity Module

Measuring ambient light intensity using the BH1750 sensor.

Project 9: Servo Motor Control

Controlling the rotation angle of a servo motor using PWM signals.

Project 10: Power Module Operations

Understanding lithium power module for solar/USB charging and phone charging.

Project 11: Combined Functions Solar Device

Integrating multiple sensors and servos for a multifunctional solar tracking device.

8. Troubleshooting Common Issues

Device Response and USB Port Issues

Troubleshooting device non-responsiveness and USB port recognition problems.

Servo Rotation Problems

Diagnosing and fixing issues where the servo motor does not rotate.

9. Resources and Support

Download Profile Link

Provides a link for downloading the project profile and related files.

Eckstein komponente KS0530 Specifications

General

Brand	Eckstein komponente
Model	KS0530
Category	Microcontrollers
Language	English