Eckstein komponente KS0530 - Keyestudio UNO Board Introduction

16
(2)Keyestudio UNO Development Board
You need to know that Keyestudio UNO development board is the core of
this solar tracking device.
Keyestudio UNO Development Board：
This UNO development board can satisfy all requirements of
microcontrollers. All you need to do is to connect it to a computer via a
USB cable and power it by an external power supply of DC 7-12.
The core processor of this board is ATMEGA328P-AU with chip
ATMEGA16U2 which can be UART-to-USB conversion plug.
It has 14 digital input/output pins (of which 6 can be used as PWM
outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a
power jack, 1 ICSP headers, and a reset button.
It controls the microcontroller. You can use it by connecting it to computer.