EasyManua.ls Logo

Ecler MPA280 - Technical Characteristics

Ecler MPA280
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL CHARACTERISTICS
Output power
(WRMS, 20Hz-20kHz, 1% THD)
1 Channel 4 Ohm 71W
4 Channels 4Ohm 4x55W
4 Channels 8 Ohm 4x40W
2 Channels 8 Ohm 2x112W
Frequency response @ max output power(-1dB) 12Hz - 200kHz
Harmonic Dist. + Noise @ 1kHz <0.06%
Intermodulation distortion (SMPTE) 50Hz and 7kHz
@ 4:1 ratio, nominal power <0.008%
TIM 100 <0.2%
Signal/noise ratio (20Hz-20kHz)
ref. 1W/4 >75dB
ref. nominal power/4 >92dB
Damping factor @ 1kHz/8 >150
Slew Rate ±10Vµs
Channel crosstalk @ 1kHz >68dB
Input connector RCA
Sensitivity nom/impedance 0dBV(1V)/>25k
SIGNAL PRESENT indicators -40dBV
Output connector Screw terminal
CLIP indicators -1.5dB real clip
Mains Depending on your country.
See characteristics in the back of the unit.
Power consumption @ max. out. power/4 450VA
Dimensions Front panel 482.6x88mm
Chassis 440x88x246mm
Weight 7.5kg

Related product manuals