Need help?Do you have a question about the Ecler PAM2100 and is the answer not in the manual?
Safety advice for installation and operation, including wiring, environment, and handling precautions.
Guidelines for rack mounting, ensuring proper airflow, and managing internal temperature.
Details on power supply voltage, current consumption, wiring color assignment, and fuse specifications.
Explanation of the switch used to disconnect chassis earth from electrical ground to prevent loops.
Description of balanced XLR connectors and pin assignments for audio signal input.
Information on Speak-on connectors and setup for bridged mode operation.
Details on the low-frequency filter, its purpose, and adjustable cut-off settings.
Procedure for powering on the amplifier and the correct sequence for audio chain components.
Explanation of front panel controls used to adjust the input signal gain.
Overview of the amplifier's non-destructive protection systems and associated status indicators.
Discussion on performance, limitations, and recommendations for operating the amplifier at 2 Ohm loads.
Information on optional filter modules that can be incorporated for bi-amplified installations.
Refers to the visual illustrations and diagrams provided in the manual.
Technical schematic illustrating the internal circuitry of the PAM1100 and PAM2100 models.
Technical schematic illustrating the internal circuitry of the PAM4100 and PAM6100 models.
A comprehensive list identifying all controls, connectors, and indicators on the amplifier.
Visual representation of the front and rear panel layout and their respective functions.
To Next Page
General
