15
ESN (Key CD) security operating procedure
How to program the Key CD
Check that the Power is OFF.
1
Press and hold button [6], then the [FUNC] button, and
hold both for more than one second.
2
A [SEC] message appears, then in two seconds it will change
to [DISC].
The CD3403 is now ready to accept your Key CD in the CD
slot.
Insert the CD into the slot.
3
A [SEC] message appears, then the Key CD is ejected.
•If there is a problem with the inserted CD, an [ERR] message
will appear for two seconds and the CD will be ejected. Reinsert
the ejected CD.
•If a CD causes the [ERR] message to appear twice in a row, try
another CD.
•The Security indicator will flash whenever the vehicle’s ignition
is switched off.
ESN (Key CD) security operating procedure
[FUNC] button
Button [6]
To Next Page
Loading...
