EasyManua.ls Logo

Eclipse CD3404 - User Manual

Eclipse CD3404
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER'S MANUAL
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
ESN E3 High-Power CD Receiver
MODEL CD3404

Table of Contents

Questions and Answers

  • C
    Cassandra ConnerAug 12, 2025
    Why is the sound dead or weak on my Eclipse Car Stereo System?
    • L
      Lisa MartinezAug 12, 2025
      The sound may be dead or weak on your Eclipse Car Stereo System because the volume control is not turned up sufficiently. Try turning up the volume. Also, check if the fader or balance control is set far to one side, and readjust them to more normal positions. Other possible causes include broken audio-signal wiring or a faulty speaker, which should be checked by your dealer.
  • C
    christianhickmanAug 15, 2025
    What to do if my Eclipse CD3404 Car Stereo System power does not turn on?
    • O
      odiazAug 16, 2025
      If your Eclipse Car Stereo System's power does not turn on, it might be due to too many electrical items installed, causing a lack of power. Have your dealer check the problem. Other probable causes include a run-down car battery, broken power, or interconnection wiring, which also require a dealer's inspection.
  • L
    Larry MayerAug 20, 2025
    How to fix an Eclipse CD3404 Car Stereo System remote control that is not working?
    • A
      Alicia AndersonAug 20, 2025
      If the remote control for your Eclipse Car Stereo System is not working, first replace the battery, as it may be low. Ensure the battery is installed with the correct polarity. Also, direct sunlight hitting the remote control light receptor may cause issues; try using the remote control closer to the receptor. If these steps do not resolve the problem, a malfunctioning remote control may be the cause, and you should have your dealer check it.
  • D
    Dr. Alejandro CollinsAug 25, 2025
    Why does my Eclipse Car Stereo System receive no stations or static noise?
    • M
      Melissa HollandAug 25, 2025
      Your Eclipse Car Stereo System may receive no stations or static noise if the antenna is retracted; extend it. Ensure the tuner is correctly tuned to a station. If you are driving outside the service area of your preset stations, tune to a local station, noting that there may be no local stations servicing the area where you are currently driving. Avoid operating other equipment with a computer or a mobile phone in your vehicle at the same time as your receiver. Other problems may include a loose or disconnected antenna cable, a bad antenna cable, which should be checked by your authorized Eclipse retailer.
  • M
    Marisa SmithAug 27, 2025
    What causes the sound to skip or be intermittent on my Eclipse CD3404?
    • G
      Gina ObrienAug 27, 2025
      If the sound skips around, is intermittent, or has bad quality on your Eclipse Car Stereo System, it could be due to a damaged disc (scratched, warped, etc.); try another disc and avoid playing damaged discs. Also, ensure the disc is clean. If the player is not mounted at a proper angle or is mounted loosely, have your dealer check it out. Avoid playback while driving over rough surfaces.
  • A
    Anna HernandezAug 31, 2025
    Why are frequencies or titles deleted from my Eclipse CD3404 Car Stereo System's memory?
    • E
      Erik DavisAug 31, 2025
      Frequencies or titles may be deleted from your Eclipse Car Stereo System's memory if the car battery has been disconnected for repair or checked out; reenter them into memory. Also, too many electrical items installed and causing a lack of available power may cause this issue, which should be checked by your dealer. Other probable causes include a run-down car battery, broken power, or interconnection wiring, which also require a dealer's inspection.
  • G
    Gerald Humphrey MDSep 4, 2025
    Why does my Eclipse CD3404 have no guide tone sounds?
    • N
      nicolepowellSep 4, 2025
      Your Eclipse Car Stereo System may have no guide tone sounds if the guide tone is disabled. Enable the guide tone.
  • H
    Heather RodriguezSep 8, 2025
    What to do if the disc cannot be ejected from Eclipse CD3404?
    • S
      Stephanie YoungSep 8, 2025
      Press the [DISC] button a bit longer (forced Eject).

Summary

For your safety in using the CD3404

Operating precautions

Notes on operation

General advice for safe and proper use of the CD player.

About compact discs

Precautions for handling and maintaining CDs for optimal playback.

About cleaning a CD

Instructions on cleaning CDs using approved cleaners and avoiding harmful solvents.

Names of controls and parts

ESN security operating procedure

About ESN

Explanation of the ECLIPSE Security Network and its function.

How to program the Key CD

Step-by-step guide to registering a CD for the ESN security feature.

How to cancel the Key CD

Instructions to remove the registered Key CD and disable ESN security.

How to resume normal operation (ESN security lock out)

Steps to restore full functionality after the security system is activated.

Basic operation

Turning the power on and off

Guide to powering the unit on, standby, and off.

Listening to a CD

Instructions for inserting and playing compact discs.

Listening to the tuner

Steps to turn on the tuner and select FM/AM bands.

Adjusting audio volume

How to increase or decrease the audio volume using the controls.

Switching audio control modes

Enabling the loudness control

Making changes with Function Mode

Disabling the guide tone feature (for button operation)

Setting the Time

How to operate the CD player

Listening to CDs

Instructions for inserting and playing compact discs.

Fast Forward;Rewind

Method for fast forwarding or rewinding the current CD track.

Playing tracks in random order (RANDOM)

How to play CD tracks in a random sequence.

How to operate the tuner

Tuning to a station

Steps to manually tune FM/AM radio stations.

Entering stations into memory automatically (The automatic preset mode: ASM)

Automatically scans and stores radio stations into memory.

Manually setting stations into memory

How to manually store preferred radio stations into memory.

Preset station scan

Previewing stations stored in memory by playing each for a short duration.

Changing the reception sensitivity for automatic scanning

Changing the radio band location

FM reception characteristics

Reception area of FM broadcasts

Multipath

How to use an optional Card remote control

Precautions in use of the remote control

Safety and handling advice for the remote control unit.

Turning the power on;off

How to use the remote to power the main unit on or off.

Replacing the battery

Guide to replacing the remote control's battery.

How to use an optional NOB remote control

Turning the power on;off

How to power the unit on/off using the NOB remote.

Adjusting the audio volume

Controlling audio volume with the NOB remote.

Replacing the battery

Guide to replacing batteries in the NOB remote control.

If you have a question:

Displayed information (for troubleshooting)

Specifications

Before installation

Components

List of items included with the main unit for installation.

Installation angle

Recommended mounting angle for optimal unit performance.

Mounting instruction

Mounting the main unit

Step-by-step guide for installing the main unit into the vehicle.

Names of lead wires and destinations

Identification of wire colors and their connection points.

System

How to contact customer service

Eclipse CD3404 Specifications

General IconGeneral
BrandEclipse
ModelCD3404
CategoryCar Stereo System
LanguageEnglish

Related product manuals