To Next PageTo Next PageHow to eject a disc that cannot be ejected from Eclipse CD5444?
To eject a disc that cannot be ejected from your Eclipse Car Stereo System, press the [DISC] button a bit longer and then press the [OPEN] button (forced Eject).
Why does my Eclipse Car Stereo System receive no stations or only static noise?
If your Eclipse Car Stereo System is receiving no stations or only static noise, it could be due to several reasons. First, check if the antenna is retracted and extend it. Ensure the tuner is correctly tuned to a station. If you are driving outside the service area of your preset stations, try tuning to a local station. Avoid operating other equipment with a computer or mobile phone in your vehicle at the same time as your receiver. If none of these steps resolve the issue, the problem may be a loose or disconnected antenna cable, which should be checked by an authorized Eclipse retailer.
Why does my Eclipse CD5444 power not turn on?
If your Eclipse Car Stereo System does not turn on, it could be because too many electrical items are installed, causing a lack of power. Other probable causes include a run-down car battery, broken power, or interconnection wiring. It is recommended to have your dealer check the problem.
What to do if the remote control does not work for Eclipse CD5444 Car Stereo System?
If the remote control for your Eclipse Car Stereo System is not working, first check if the battery is low and replace it if necessary. Ensure the battery is installed with the correct polarity. Make sure direct sunlight is not hitting the remote control light receptor; if it is, use the remote control closer to the receptor. If these steps don't solve the problem, the remote control may be malfunctioning, and you should have your dealer check it.
Why does the sound skip or have bad quality in my Eclipse CD5444 Car Stereo System?
Sound issues like skipping, intermittence, or poor quality in your Eclipse Car Stereo System can stem from a damaged disc (scratched, warped, etc.), so try another disc and avoid playing damaged discs. Ensure the disc is clean. Avoid playback while driving over rough surfaces. If the problem persists, the player might not be mounted at a proper angle or is mounted loosely and it should be checked out by your dealer.
Why are frequencies or titles deleted from memory in my Eclipse CD5444?
If frequencies or titles set in memory are being deleted from your Eclipse Car Stereo System, it could be because the car battery has been disconnected for repair or checked out; if so, reenter them into memory. It may also be caused by too many electrical items installed and causing a lack of available power. Other probable causes include a run-down car battery, broken power, or interconnection wiring, and it is recommended to have your dealer check the problem.
What to do if I tried to playback an audio file on an MG memory stick with playback limitations on Eclipse CD5444?
If you tried to playback an audio file on an MG Memory Stick with playback limitations on your Eclipse Car Stereo System, note that data that includes a playback guard can not be played back.
Why can't I record music from CD-R or CD-RW to MG memory stick on Eclipse Car Stereo System?
This deck is compatible with SCMS/SDMI standards, and so it can not record music from audio CDs such as CD-Rs and CD-RWs.
What to do if the CD changer internal temperature is high in Eclipse CD5444?
If the CD changer internal temperature is high in your Eclipse Car Stereo System, wait until it cools down. Resume playing after the “High temperature sensed and CD stopped" display disappears, or turn the ACC off once before turning it on once again to resume the operation.
What to do if I tried to playback an incorrectly formatted memory stick in Eclipse CD5444?
If you tried to playback an incorrectly formatted memory stick in your Eclipse Car Stereo System, use the deck to format the Memory Stick.
General| Brand | Eclipse |
|---|---|
| Model | CD5444 |
| Category | Car Stereo System |
| Language | English |
Explains the meaning of Warning and Caution symbols used in the manual.
Covers critical safety advice like modifications, voltage, and driving operations.
Provides essential guidelines for safe and proper use of the device.
Details how to handle, store, and clean CDs and Memory Sticks for optimal playback.
Identifies and describes the main buttons and slots on the front of the unit.
Explains ESN, Key CD, Memory Stick, and ACC security setup.
Guides on power management, playing audio sources (CD, MS, Tuner), and volume.
Details equalizer, DSP, time alignment, and other sound adjustment features.
Instructions for playing CDs, track navigation, and title management.
Information on MP3 standards, media, file playback, and organization.
Guides on playing, recording, and managing Memory Stick content.
Instructions for tuning stations, automatic/manual memory, and reception settings.
Details on playing CDs, track navigation, scan, repeat, and random modes with a changer.
Covers remote control precautions, cleaning, and basic functions.
Instructions for using the NOB remote, including battery replacement.
Lists included parts and specifies the correct installation angle.
Step-by-step guide for physically installing the main unit.
Explains lead wires, destinations, and system diagrams for installation.
Guidance on resolving common issues and resetting the unit.
Explains status codes and information displayed for troubleshooting.
Provides contact details for customer service and service centers by region.
