25
ESN security operating procedure
Note
If after 5 tries the correct Key CD is not inserted, the display
reads [CALL800]; the unit must be returned to Eclipse to be
reset. In this case, please contact your Eclipse dealer for
assistance. For country-specific customer service information,
refer to "How to contact customer service" on page 148.
Your Key CD can be easily forgotten. Write the
album name in a reminder note (See page 151).
After the 5th incorrect attempt, the display reads [HELP]
for five seconds.
After the [HELP] message will appear for five seconds,
serial number will appear.
Press the [OPEN] button to close the front panel.
Press button [6], then the [FUNC] button, and hold them
for five seconds.
After the [SEC] message will appear for two seconds,
rolling code (six digit) will appear.
Press [FUNC] button.
A [DISC] message appears.
You will have five more attempts the correct disc.
Insert the key CD into the slot.
If the correct CD is inserted, an [OK] message will appear
for two seconds and the CD will begin playing.
•If an incorrect CD is inserted, an [ERR_] ("ERR" and error
number) message will appear for two seconds, after which the
CD will be ejected.
•This process cancels the protection for ESN deck.
To Next Page
Loading...
