112
How to operate the Sound Adjustment Mode
This function uses harmonic synthesis to restore the high-
frequency component that is lost as a result of the compression
process so that fresher sound can be obtained during MP3,
ATRAC3 playback.
Turn the [SEL] button to select HARMONIZER.
Press the [SEL] button.
The mode will change to multi-harmonizer setting mode.
Turn the [SEL] button to select the setting item.
When the button is turned, the setting item changes in the
following order.
HI: High effectiveness
LOW: Low effectiveness
Press the [RTN] button.
At this time, other adjustments can also be made in
advance mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
To Next Page
Loading...
Need help?
General
