Eclipse CD5444 - Setting a Station Name

82
How to operate the tuner
Setting a station name
Press the [FUNC] button for less than one second while
in the tuner mode.
1
Turn the [SEL] button to select STATION.
2
Press the [SEL] button.
3
Press the [SEEK ] button to select the character type.
4
Pressing the button will switch types from [ABC] (upper-case
alphabet characters) to, [123] (numeric characters) and then
[!&?] (symbols).
The station name setting mode is activated.
Press either [SEL] or [FAST ] button to select the
position in which to enter the character.
5
The character will be inserted where the cursor is flashing:
[SEL] button: Moves the cursor to the right.
[FAST ] button: Advances the cursor to the left.
Station name settings can be changed.
[SEL] button
[FAST ] button
[FUNC] button
[SEEK ] button
[RTN] button