Eclipse CD5444 - How to Switch the Security Type (Key CD Security;Memory Stick Security)

21
ESN security operating procedure
[FUNC] button
Button [3]
How to switch the security type (Key CD
security/Memory Stick security)
You can switch the type of security being used (Key CD security or
Memory Stick security). The initial setting is for Key CD security to be
used.
Check that the Power is OFF.
1
Press and hold button [3], then the [FUNC] button, and
hold both for the more than two seconds.
2
Security type will switch from Key CD security (DISC SEC) ←→
Memory Stick security (MS SEC) in order each time the button
is pressed.
ATTENTION
If a security is activated, switching the security type is not
available.