10
The powerchair has a manual freewheel model lever on each motor. Manual freewheel levers
enable you to disengage the drive motors from the gearboxes and maneuver the chair manually.
WARNING: DO NOT USE THE POWERCHAIR WHILE THE DRIVE MOTORS ARE
DISENGAGED! DO NOT DISENGAGE THE DRIVE MOTORS WHEN THE POWERCHAIR IS ON
AN INCLINE, AS THE UNITCOULD ROLLON ITS OWN, CAUSING INJURY!
To engage or disengage the drive motors:
1. Locate the lever on the top of each motor.
2. Push the two levers downward to engage the drive motors. (A)
3. Pull the two levers upward to disengage the drive motors. (B)
WARNING: IT IS IMPORTANT TO REMEMBER THAT WHEN YOUR POWERCHAIR IS
IN FREEWHEEL MODE, THE BRAKING SYSTEM IS DISENGAGED.
Motor Engaged Motor Disengaged
A B
To Next Page
Loading...
Need help?
General