EKO INSTRUMENTS CO., LTD. 4-20mA Signal Converter MC-11 Instruction Manual V1
EKO Products are designed and manufactured with consideration for safety; however, please make
sure to read and understand this instruction manual thoroughly to be able to operate the instrument
safely in the correct manner.
Attention to user; pay attention to the instructions given on the
instruction manual with this sign.
High voltage is used; pay special attention to instructions given on
this instruction manual with this sign to prevent electric leakage
and/or electric shocks.
1. Setup
! Do not install 4-20mA Converter in a place, which may get wet or soaked in water.
3-2. HIGH VOLTAGE WARNING
1. Power Supply
! Always check the DC voltage for the specified supply power before connecting the 4-20mA
Converter (12 – 24 VDC).
To Next Page
Loading...