Ecobee SMART THERMOSTAT - Warranty Information; 3-Year Limited Warranty; Warranty Exclusions and Limitations

Low Temperature Alert Select this to set the
temperature at which the Smart Thermostat will
generate a Low Temperature Alert. The range can be:
O – no alert will be generated
Set temperature range of 35 – 68°F (1.5 – 20°C).
High Temperature Alert Select this to set the
temperature at which the Smart Thermostat will generate
a High Temperature Alert. The range can be:
O – no alert will be generated
Set temperature range of 76 – 104°F (24.5 – 40°C).
Low Humidity Alert Select this item to set the
humidity level at which the Smart Thermostat will
generate a Low Humidity alert. The range can be
adjusted to:
O – no alert will be generated
Set humidity range of 5 – 95% R.H. in 5% increments
High Humidity Alert Select this item to set the
humidity level at which the Smart Thermostat will
generate a High Humidity alert. The range can be
adjusted to:
O – no alert will be generated
Set humidity range of 5-95% R.H. in 5% increments
Auxiliary Heat Run-time Alert (optional)
In a heat pump with auxiliary heat conguration, you
can program the Smart Thermostat to generate an alert
if the auxiliary heat runs for more than this programmed
amount of time during a 24-hour period.
Auxiliary Outdoor Temperature Alert (optional)
In a heat pump with auxiliary heat conguration, you can
program the Smart Thermostat to generate an alert if the
auxiliary heat is called for when the outdoor temperature
exceeds this programmed set point (this feature requires
an internet connection to function properly)
List of Alerts
Below is a complete list of alerts. Depending on your
conguration, some of these may not apply to your system.
Low Battery
Furnace Air Filter
Ventilator Filter
UV Lamp
Humidier Filter
Comms fault
Low Temp. Alert
High Temp Alert
Low Humidity Alert
High Humidity Alert
Heat Not
Responding
Cool Not
Responding
Input 1
Input 2
Maintenance
Reminder
Auxiliary Heat
Run Time
Auxiliary Outdoor
Temperature
The battery in your Thermostat will need
to be changed soon.
Your furnace lter needs to be
cleaned/changed.
Your ventilator lter needs to be
cleaned/changed.
Your UV lamp needs to be changed.
Your humidier pad needs to be
cleaned/changed.
There is no communication between the
Thermostat and the Equipment Interface
module.
The temperature in the home is too low.
The temperature in the home is too high.
The humidity in the home is too low.
The Humidity in the home is too high.
The system has failed to heat the home.
The system has failed to cool the home.
Used if this input is programmed to
generate an alert.
Used if this input is programmed to
generate an alert.
You are due for regular maintenance.
Your auxiliary heat source is running
too often.
Your auxiliary heat source is running
at higher than expected outdoor
temperatures.
Performing a Hardware Reset 30
29 Conguring The Smart Thermostat