EcoFlow 110W - Speed Up Solar Charging; Wire Solar Panels in Parallel

1. Connect the positive poles of the two solar panels with the MC4
parallel cable and repeat the step for the negative poles.
2. Connect the parallel cable connectors (output side) with the
MC4 connectors of the Solar Charging Cable (MC4 to XT60
cable) respectively.
3. Connect the XT60 connector on the Solar Charging Cable(MC4
to XT60 cable) to the XT60 port on the portable power station
to recharge the unit.
(refer to the figure below)
Wire solar panels in parallel
Speed Up Solar Charging
Solar MC4 parallel connection cable
Solar Panel A Solar Panel B
MC4
* Users have to buy the solar panels and other
parallel connection accessories seperately.
7
The kickstand feature should only be
used before 10:00am or after 2:00pm.
To use the product during the midday
sun, simply place the solar panel flat on
the ground.
1 1
1 1
2
2
3
*For more information and methods about solar charging,please
refer to the user manual of the specific portable power station.