EasyManua.ls Logo

EcoFlow 110W - Wire Solar Panels in Series; Usage Precautions

EcoFlow 110W
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Snap the male connector of one solar panel into the female
 
connector of the other respectively to wire the three solar panels
 
 
in series.
2. Wire the two connectors that are unwired in step 1 with the Solar
 
Charging Cable (MC4 to XT60 cable) respectively.
3. Connect the XT60 connector on the Solar Charging Cable (MC4
 
to XT60 cable) to the XT60 port on the portable power station
 
to recharge the unit.
(refer to the figure below)
Wire solar panels in series
Avoid
Behaviors above that demage the solar panel, will cause the cell inside the solar panel to crack and ecien-
cy drop, or even unusable. The free warranty period does not cover damage resulting from improper use of
the product.
Supported
Product
110W
RIVER mini
RIVER Series
DELTA mini
DELTA
DELTA Max
DELTA Pro
1
1
4
6
3
3
Max. No. Of Panels Connected in
Series to Supported Products
1
2
3
2
1
*For more information and methods about solar charging,please
refer to the user manual of the specific portable power station.
MC4

Related product manuals