X-Boost: Powering High-Wattage Appliances
X-Boost is an innovative technology exclusive to EcoFlow power stations. It
allows the power station to support appliances with a higher power
requirement than its rated power output.
How do I use this feature?
X-Boost is disabled by default. To use it：
1.
Connect any high-wattage appliance to an AC output socket on the power
station.
2.
Open the EcoFlow app and log into your EcoFlow account.
3.
Turn on X-Boost in the device’s settings.
What kind of devices does X-Boost support?
X-Boost is more suitable for heating devices, such as an electric blanket, a
water heater, or a heat pump.
X-Boost does not support devices with voltage protection (such as precise
instruments). If such devices are connected, they may stop working due to
low voltage.
Notice
X-Boost is unavailable when the power station is connected to an AC
power source (e.g. The power station is charging or in bypass
mode).
※ Bypass mode: When you recharge and discharge the device(via AC
input & output ports) simultaneously, the device enables bypass
mode automatically.
Reference: Power with X-Boost Feature
Uninterrupted Power Supply (UPS): Backup for
Essential Devices
A UPS is a device or system that provides continuous backup power during
grid power outages. You can use the power station as a UPS to support
essential household appliances.
The power station acts as a standby UPS with a transfer time of 10 ms. When
To Next Page
Loading...
