EcoFlow DELTA 3 Plus - Storage and Maintenance

How to select the operating system?
When powering up a PC, follow the steps in BASIC SETUP to complete the
power connection first. Then download and install [Power Manager]
software according to the PC operating system.
When powering up a professional NAS device, you can choose to establish
wired communication with the NAS device or a PC. The version of software
needs to be consistent with the system that the power station
communicating with.
How to establish communication?
1.
Go to the Power Manager website
(https://www.ecoflow.com/support/download/) and download the
appropriate installation package.
2.
Install the software on your PC.
3.
After completing the basic UPS setup, use a USB data cable (not included )
to connect the power station's USB-C Port to your PC or NAS's USB port.
4.
Launch the software to proceed.
Storage and Maintenance
Storage
1.
Optimal storage temperature: 68°F-86°F (20°C-30°C).
2.
Do not store the product in places where the temperature exceeds 113°F
(45°C) or falls below 14°F (–10°C).
3.
Store the product in a tidy, dry, and well-ventilated place.
4.
Keep the product away from liquids, intense heat, and sharp objects.
5.
For long-term storage of the product, follow these steps every 3 months to
maintain battery health:
Discharge the product to 0% battery level.
Recharge the product to 60% battery level.
Notice
the product will not be covered by the warranty if it is not charged or
discharged for more than 6 months.
Cleaning
Use a soft, dry cloth to wipe and clean the product.
Maintain Battery Health
1.
Avoid leaving the product unused for extended periods of time.
2.
Charge and discharge the product every 3 months to increase its lifespan.