NOTICE
This list of supported devices will be updated continuously. Firmware
versions that support more devices will be released soon, please stay tuned.
Some EcoFlow products are not sold in your country or region.
Add devices
Add new devices via the EcoFlow app to your phone and PowerInsight automatically
synchronizes the added devices.
If the app contains devices that PowerInsight does not support, they will not be
displayed in PowerInsight.
Add EcoFlow Devices
Bring your phone close to the device, and connect to the internet according to the
instructions in the app.
Add Matter-supported Devices to EcoFlow System
You can add mater-supported thermostats, light bulbs, and smart plugs to build a
smarter home.
1. Swipe down from the top-right corner of any PowerInsight page and tap Settings >
Matter >Binding matter.
2. Open the EcoFlow app, then tap + > Scan to scan the QR code displayed on the
PowerInsight screen.
3. Scan the Matter QR code of the device that needs to be added using the EcoFlow
To Next Page
Loading...
