Ecolab Aqua Balance Pure Comfort 2.0 - ELECTRICAL SPECIFICATIONS; Model and Fuse Sizing

14
ELECTRICAL SPECIFICATIONS
Each ECOLAB model has very specific wiring requirements based on its line
voltage and amperage draw.
• Model 2.0 operates at 110 – 120v. A power cord will be supplied out of the
power box. Plug this into any standard 110 – 120v outlet. As above, the
cord labeled ORP must be plugged into a controller, or a 120v outlet.
• Your ECOLAB system must be wired to the main pump power supply, so
that if the pump is shut down, the power to your ECOLAB system is lost.
ELECTRICAL SPECIFICATIONS AND FUSE SIZING
MODEL:
MAX PRIMARY AC
AMPS
SYSTEM INPUT
VOLTAGE
BREAKER
REQUIRED
2.0
3.7
110 – 120v
20amp
Fusesizing:
Model Fuse size and type
2.0 10amp dual element, slow blow, RK5 fuse