Ecolab Aqua Balance Pure Comfort 2.0 User Manual

Ecolab Aqua Balance Pure Comfort Mineral Pool & Spa System Model
2.0
ECOLAB Aqua Balance Pure Comfort Mineral Pool & Spa System, Model 2.0
CHLORINE GENERATOR
CONTROLS BACTERIA AND ALGAE
in
Swimming Pool (and Spa) Waters
COMMERCIAL
A maximum of 113,600 L of water can be treated with
Ecolab Aqua Balance Pure Comfort Mineral Pool & Spa System, Model 2.0
Maximum output of hypochlorous acid equivalent to 0.896 kg
of free available chlorine per day
For swimming pools, a range of 1.0 - 3.0 ppm of free available chlorine
must be maintained.
For spas, a range of 3.0 - 5.0 ppm of free available chlorine must be maintained.
KEEP OUT OF REACH OF CHILDREN
READ THE LABEL AND OPERATING MANUAL BEFORE USING
REGISTRATION NO. 29705
PEST CONTROL PRODUCTS ACT
WARNING: Operating the Ecolab Aqua Balance Pure Comfort Mineral Pool & Spa System
Model 2.0,
without water flow through the cell can cause a buildup of flammable gases
which can result in FIRE OR EXPLOSION.
NOTICE TO USER: This pest control product is to be used only in accordance with the
directions on the label. It is an offence under the Pest Control Products Act, to use
this product in a way that is inconsistent with the directions on the label.
Ecolab Inc.
1 Ecolab Place
St. Paul, MN 55102
1-800-354-5326
2019-4018
2019-11-01

Ecolab Aqua Balance Pure Comfort 2.0 Specifications

General

Category	Water Filtration Systems
Model	Aqua Balance Pure Comfort 2.0
Brand	Ecolab
Filtration Technology	Reverse Osmosis
Installation Type	Under Sink
Filter Life	6 months
Certifications	NSF/ANSI Standard 58

Summary

INTRODUCTION

WARRANTY INFORMATION

SAFETY INFORMATION

General Safety Precautions

Key safety warnings regarding installation, operation, and usage of the system.

Spa Health and Usage Warnings

Precautions for spa users, including health conditions and maximum temperatures.

PREPARING YOUR WATER BEFORE INSTALLATION

SALT CHART FOR CORRECT MAINTENANCE

TOOLS AND PARTS REQUIRED FOR INSTALLATION

PLUMBING YOUR SYSTEM

ELECTRICAL SPECIFICATIONS

Model and Fuse Sizing

Details on model specifications, input voltage, breaker requirements, and fuse sizing.

STARTING THE SYSTEM

System Startup Procedure

Step-by-step instructions for powering on and initiating the system operation.

GENERAL OPERATION

MAINTENANCE AND CLEANING

Cleaning and Maintenance Procedures

Instructions for maintaining the system, including cleaning the cell and managing salt levels.