•
When replacing the cell, only use replacement cells having a label that
clearly states that it is a replacement cell for the chlorine generating
device Ecolab Aqua Balance Pure Comfort Mineral Pool & Spa System
Model 2.0, REGISTRATION NUMBER 29705, PEST CONTROL
PRODUCTS ACT.
•
Follow all aspects of the local and National Electrical Code(s) when
installing Ecolab Aqua Balance Pure Comfort Mineral Pool & Spa
System Model 2.0.
•
NOTE: For outdoor pools, chlorine residuals can be protected from
destruction by sunlight by addition of stabilizer (cyanuric acid).
•
NOTE FOR USE ON SPAS: For proper sanitation, spas must be
completely drained periodically. The number of days between COMPLETE
DRAINAGE is equal to the volume of spa water in litres, divided by 10
times the maximum number of daily spa users. Refill spa with water and
repeat DIRECTIONS FOR USE of the device.
•
HEALTH AND HYPERTHERMIA WARNINGS FOR SPA DEVICES:
➢
People with a medical condition should consult a physician before
entering pool or spa water.
➢
Maximum spa water usage temperature is 40 degrees C. Bathing in
spa water at 40 degrees C should not exceed 15 minutes.
To Next Page
Loading...