Ecolab EcoPro Short Operating Instructions

6 Technical data
6.1
General data
Description
Pump size
00510X 01110S 03003M 05010M 12003M
Max. metering capacity [l/h]
1)
5 11 30 50 120
Min. metering capacity [l/h]
EcoAdd 0,01 0,01 0,01 0,01 0,01
EcoPro/
EcoUp
0,05 0,11 0,3 0,5 1,2
Max. metering back-pressure [MPa (bar)] 0,1 (10) 0,03 (3) 1 (10) 0,03 (3)
Dosage rate/stroke [ml] 50 Hz/60 Hz
2)
0,53 1,04 3,16 5,74 13,51
1) V
alues calculated using water as a metering medium at a temperature of 20 °C.
2) Values vary depending on calibration.
6.2 Electrical data
Description
Pump size
00510X 01110S 03003M 05010M 12003M
Supply voltage [V / Hz] 115 - 240 ±10% / 50/60
Motor power [W] 20 50
Type of protection IP65
Protection class II
Inputs:
External enable
EcoPro,
EcoUp,
EcoAdd
Max. 24 V DC / 6 mA
Level
EcoUp,
EcoAdd
Batch EcoAdd
Pulse
EcoUp,
EcoAdd
Max. 25 mA (approx. 50 ohms) max. pulse length 15
ms
Standard signal
(0/4-20 mA)
EcoAdd Max. 25 mA (approx. 50 Ohm)
Outputs:
Alarm (relay contact)
EcoUp,
EcoAdd
230 V, AC/DC, 3 A
Dosage rate signal
(transistor output)
EcoUp,
EcoAdd
Max. 24 V , DC, 200 mA
External power
supply
EcoUp,
EcoAdd
5 V, max. 100 mA
6.3 Declaration of Conformity
6.3.1
CE Declaration of Conformity
Due to technical changes, an updated version of the ‘Declaration of Conformity
’
may apply. The most recent version is published online: To download this, use
this link or scan the QR code provided.
http://www.ecolab-engineering.de/fileadmin/download/
bedienungsanleitungen/ce-konformitaetserklaerung/CE/CE_EcoPro_EcoAdd.pdf
Technical data
31 10240750 Ver. 4-11.2023

Ecolab EcoPro Specifications

General

Brand	Ecolab
Model	EcoPro
Category	Water Pump
Language	English